Skip to content
Standing seam soffit and fascia by Roofing Group at Sans Souci Residence, Sans Souci

Residential ยท Sans Souci, NSW

Sans Souci Residence

A standing seam soffit and fascia box over a Sans Souci entry, folded against rough sandstone.

Location
Sans Souci, NSW
Completed
2014
Sector
Residential
Metal
Zinc
Finish
VMZINC Quartz
System
Interlocking panel V25

Case study

Standing seam soffit and fascia

  1. The brief

    A projecting entry canopy clad on its face, its returns and its underside. Its neighbour is a rubble sandstone wall, which has no straight line to work to.

  2. What we did

    The canopy was set out as one development so the metal turns every corner without a joint. The junction with the stone is scribed on a folded flashing rather than fought with sealant.

  3. The detail

    Downlights in the soffit were located on the shop drawings so they sit centred between seams. Cutting a light into a soffit after the metal is up always puts it in the wrong place.

Have a project on the board?

Send drawings or a brief. Concept sketches are enough to get a useful answer.

  1. You send drawings or a brief

    A plan, a section and an elevation are enough.

  2. 1business day

    An estimator replies

    Named contact, not a queue.

  3. 7days

    Tender returned

    Priced by system, metal and area.