Skip to content
Standing seam roof by Roofing Group at North Bondi, North Bondi

Residential · North Bondi, NSW

North Bondi

A standing seam roof in VESTIS Patina Grey over a North Bondi house, set out so every hip on a many sided roof lands on a fold rather than a capping.

Location
North Bondi, NSW
Completed
2023
Sector
Residential
Metal
Aluminium
Finish
VESTIS Patina Grey
System
Standing seam

Case study

Standing seam roof

  1. The brief

    The house sits on the rock shelf above the ocean with an apartment block hard against each side. The roof is cut into a run of hips, valleys and gablets that meet at a single point over the living room, with skylights and a heat pump inside the field.

  2. What we did

    We set the pans out from that centre point first and worked back to the eaves, so the seams arrive at each hip on the same module and the hip line stays straight. Every hip and valley is folded from the roof sheet, and the pans die into it rather than under a proprietary cap.

  3. The detail

    Both side boundaries are within a metre of a neighbouring wall, so the upstands and apron flashings were folded in the workshop to the surveyed dimension and slid into place from above. The skylight kerbs are turned up inside the pan so the waterline sits clear of the deck at every opening.

Have a project on the board?

Send drawings or a brief. Concept sketches are enough to get a useful answer.

  1. You send drawings or a brief

    A plan, a section and an elevation are enough.

  2. 1business day

    An estimator replies

    Named contact, not a queue.

  3. 7days

    Tender returned

    Priced by system, metal and area.