Skip to content
Curved standing seam awning and soffit by Roofing Group at Bridge Street, Sydney CBD

Commercial · Sydney CBD, NSW

Bridge Street

A curved standing seam awning and soffit on Bridge Street in the Sydney CBD, folded to a tight radius over a glazed shopfront.

Location
Sydney CBD, NSW
Completed
2020
Sector
Commercial
Metal
Zinc
Finish
VMZINC ANTHRA-ZINC
System
Standing seam and flat lock
Builder
Calida Projects
Architect
Smart Design Studio

Case study

Curved standing seam awning and soffit

  1. The brief

    The awning rolls from vertical to horizontal in a single curve above a heritage streetscape, with towers directly overhead. Site access was a live CBD footpath and the work had to look resolved from a metre away.

  2. What we did

    Pans were curved in the workshop and set out so the seam spacing stays even through the roll. The soffit is lined in the same metal at the same centres and the fascia is folded from the same coil.

  3. The detail

    A curve this tight shows every inconsistency in seam height, so the pans were folded on a jig instead of being formed on site. The roll reads as one surface from the footpath because no two seams differ.

Have a project on the board?

Send drawings or a brief. Concept sketches are enough to get a useful answer.

  1. You send drawings or a brief

    A plan, a section and an elevation are enough.

  2. 1business day

    An estimator replies

    Named contact, not a queue.

  3. 7days

    Tender returned

    Priced by system, metal and area.